Hi

Contact us for more special pricing!

Get a free quote

Please provide your phone number and email address, and we will contact you promptly within one business day to resolve your inquiry as soon as possible.

HLM Double-Beam Lime Kilns
HLM Double-Beam Lime Kilns
HLM Double-Beam Lime Kilns
HLM Double-Beam Lime Kilns
HLM Double-Beam Lime Kilns
+
  • HLM Double-Beam Lime Kilns
  • HLM Double-Beam Lime Kilns
  • HLM Double-Beam Lime Kilns
  • HLM Double-Beam Lime Kilns
  • HLM Double-Beam Lime Kilns

HLM Double-Beam Lime Kilns

Two-beam-type active lime kilns possess the advantages of low heat consumption, high lime activity, strong fuel adaptability, simple structure, low investment and low operational cost, etc.

Phone:

0311-85468860/8613811453008

  • Product Description
  • Two-beam-type active lime kilns possess the advantages of low heat consumption, high lime activity, strong fuel adaptability, simple structure, low investment and low operational cost, etc. This type of kiln is widely used in steel industry for technologies such as the composite firing of the blast furnace gas and coke oven gas and is used in chemistry industry for the composite firing of calcium carbide furnace off-gas and pulverized coal, for the purpose of calcinating active lime of high quality with low energy consumption.
    This lime kiln type has obtained the national patent and has been widely used in large steel enterprises and chemical industries throughout the whole country.

     

    Specification and Technical Features
    ◎ Production capacity: 100t/d to 600t/d. Take the 300t/d kiln for example, the turn-down ratio is from 70% to 100%. The production capacity can be regulated within the range of 210t/d-300t/d with no influence on product quality and consumption.

    ◎ Grain size: 30mm to 60mm; 40mm to 80mmSize, granularity range as above.

    ◎ Fuel type: The steel industry’s blast furnace gas, coke oven gas, convertor coal gas, calcium carbide furnace exhaust, natural gas, generator gas, liquefied petroleum gas, heavy oil can be fuels of our vertical shaft kilns.
    In addition, mixed fuel comprised of above fuels (gas and gas, gas and liquid, gas and solid, liquid and solid and so on) can also be fuels of our vertical shaft kilns.

    ◎ Lime products: lime in good quality and high activity (higher than 320ml,4N HCL Ten minutes). The residual CO2 ≤ 3.5%

    ◎ Low heat consumption: this kiln type makes full use of heat energy. Primary air is preheated by exhaust gas while secondary air is preheated by cooling lime. Fuel is combusted completely and heat is fully utilized. Therefore the ratio of heat consumption is low (1050kcal/kg lime).

    ◎ High operating rate: continuous operation of 48 weeks per year.

     

    II. Structural Features

    ◎ The shape of kiln body is rectangular or cylindrical. There are double-deck(upper and lower) burner beams in the kiln. The waste gas drawing-out beams are set on the kiln top and bottom. The kiln is divided into five parts: material storage zone, preheating zone, calcining zone, posterior calcining zone, cooling zone.

    ◎ The core feature of this type of kiln is use two layer of burning beam. Beams type of burners equipped on the burning beams distribute fuels(gas, liquid, solid) on kiln cross section and make the fuel to be calcinated uniformly with combustion air. The number and distribution of burner beams on each layer is related to the kiln cross section area. Fuel (such as gas. liquid and solid) feeding pipes are placed in the beam. Burners mix fuel with the combustion air uniformly by means of distributing fuel to the cross section of kiln. Burners on each level share the same numbers and area. This enables the temperature of kiln cross section to be distributed evenly to reduce the raw-burner rate and increase the lime reactivity by calcination of high-efficiency and uniformity. The above is one of the features of this kiln type.

     

    ◎ Off-gas extracting beam is on the top of the kiln. Kiln gas is extracted by the gas extracting beam through the opens to ensure negative pressure of the kiln section is evenly distributed. Suctioned kiln gas exchange the heat with the combustion air, makes thermal energy can fully utilizing.

     

    ◎ The two-way pressure system our kiln possesses is another important feature. Through the special shaped spreader beam, blowers blow secondary air into the cooling zone to cool lime uniformly. This enables the negative pressure system to control the air amount of primary air and secondary air more precisely. Waste air generated from calcination is discharged from the kiln top to keep negative pressure inside the kiln and this can evenly distribute heat on the kiln section. The air volume adjustment range is from 10% to 100%. By means of adjusting the combustion air amount, our kiln is able to be operated in best conditions so that the good combustion, low heat consumption, low power consumption and low production cost can be guaranteed.

    III. Process Flow Diagram:

     

Keywords:

HLM Double-Beam Lime Kilns

Phone:

Shijiazhuang Xinhua Energy Environmental Protection Technology Co., Ltd. is a comprehensive equipment manufacturing and installation enterprise. Its products are widely used in industries such as metallurgy, chemical engineering, nonferrous metals, machinery, building materials, petrochemicals, pharmaceuticals, and fertilizers, and the company is a specialized manufacturer of various types of industrial furnaces.

Product Inquiry Related products

Get a free product quote

Please provide your phone number and email address, and we will contact you promptly within one business day to resolve your inquiry as soon as possible.