Hi

Contact us for more special pricing!

Get a free quote

Please provide your phone number and email address, and we will contact you promptly within one business day to resolve your inquiry as soon as possible.

Shanxi is accelerating the phasing out of outdated production capacity in the calcium carbide industry to free up development space.


Release date:

2011-04-29

Author:

Since the beginning of September, three developments in Shanxi’s calcium carbide industry have drawn attention from industry insiders. First, Shanxi plans to phase out 12 outdated calcium carbide producers by year-end, involving 14 calcium carbide furnaces and a combined capacity of 200,000 tons. Second, currently only four calcium carbide producers remain in the province, with output falling short of 200,000 tons and operating rates below 20%. Third, tight market supply has once again pushed calcium carbide prices higher in Shanxi. The prevailing ex‑factory quote for Grade‑1 calcium carbide stands at RMB 3,300–3,350 per ton, with premium grades fetching RMB 3,400–3,450 per ton. Looking ahead, amid ongoing energy‑conservation and emissions‑reduction policies, regional calcium carbide shortages are expected to persist. Meanwhile, robust cost support from PVC producers is likely to further bolster PVC prices, fueling bullish sentiment among manufacturers. Consequently, calcium carbide prices in Shanxi are poised for another modest uptick. Some experts believe that phasing out outdated capacity will create room for more advanced players to expand their market share.

With the implementation of the national policy to phase out outdated production capacity, a large number of small and medium-sized calcium carbide enterprises are bound to gradually exit the market. The “State Council Notice on Further Strengthening Efforts to Eliminate Outdated Production Capacity,” issued in early April this year, explicitly sets the 2010 target for phasing out calcium carbide capacity at 718,000 tons. Shanxi Province, where calcium carbide producers are heavily concentrated, accounted for more than 25% of the nation’s total output in the 1990s, making it China’s leading calcium carbide‑producing province. In recent years, numerous small‑scale producers that failed to comply with policy have been forcibly shut down, and Shanxi has already eliminated 58% of its outdated calcium carbide capacity. By the end of 2009, the province had 43 calcium carbide producers with a combined capacity of 1.4 million tons and an annual output of 570,000 tons, representing 3.8% of the national total; accordingly, Shanxi’s ranking in national calcium carbide production slipped from first to tenth. As a result, the province’s calcium carbide industry has seen its capacity steadily shrink, with output declining by 70%.

Experts analyze that, as the pace and intensity of phasing out outdated production capacity continue to accelerate, the oversupply issue in the calcium carbide market has been alleviated to a certain extent. PVC is the largest downstream consumer of calcium carbide, accounting for more than 75% of its apparent consumption. In 2010, the easing of the global financial crisis and the recovery of the domestic economy boosted PVC demand, driving up prices to an annual peak exceeding RMB 9,000 per ton. In Shanxi Province, frequent power rationing and even outright power cuts imposed on calcium carbide producers severely disrupted production, curbing supply and pushing prices higher or keeping them at elevated levels. Currently, downstream enterprises such as Taiyuan Chemical Group, Shanxi Sanwei Group, Yushe Chemical Group, and Shanxi Synthetic Rubber Group source all their calcium carbide needs from Inner Mongolia, Shaanxi, and other regions. With raw materials sourced externally, these companies constantly face the anxiety of potential supply shortages. Experts predict that the ongoing trial operations of Shanxi Yushe Chemical’s 400,000‑ton‑per‑year calcium‑carbide‑based PVC project, along with the under‑construction Shanxi Lu’an projects—each with an annual capacity of 200,000 tons of polyvinyl chloride and ion‑exchange membrane caustic soda—will create conditions that further tighten Shanxi’s calcium carbide market and push prices higher. By 2015, Shanxi’s calcium carbide demand is expected to exceed 3 million tons.

In recent years, in order to address the severe overcapacity plaguing China’s calcium carbide industry, the state has further intensified efforts to restructure the sector. Between 2006 and 2009, the country phased out 2.87 million tons of outdated calcium carbide capacity, with Shanxi Province accounting for 1.2 million tons. This year, the national target calls for an additional 718,000 tons to be eliminated, of which Shanxi is slated to contribute 205,000 tons. Recently, Shanxi issued a final ultimatum to enterprises listed on the blacklist of those slated for closure or phase-out: if backward‑capacity facilities fail to be shut down on schedule, mandatory shutdowns will be enforced by September 30, with power supply companies implementing compulsory disconnection measures. According to reports, no calcium carbide producer in Shanxi currently exceeds 100,000 tons in annual output, and only ten furnaces have transformer capacities of 25,000 kVA or more—of these, just one is a fully enclosed type. By the end of this year, Shanxi’s total elimination of obsolete calcium carbide capacity is expected to reach 1.4 million tons. In line with the national principle of “equivalent replacement and phasing out of outdated capacity,” Shanxi has already freed up sufficient capacity and space to develop next‑generation calcium carbide furnaces. The Shanxi Yangmei Group’s 1-million‑ton (Phase I: 400,000 tons) calcium carbide project, whose groundbreaking took place late last year, along with the Shanxi Leixin 500,000‑ton‑per‑year enclosed‑furnace project currently under construction, represent major restructuring initiatives aimed at accelerating the elimination of outdated production capacity and achieving a scientifically sound industrial layout. As the head of Shanxi Leixin’s preparatory office remarked, “It is precisely because we are phasing out obsolete projects that we now have room to build.” Once completed, these projects will meet the region’s demand for calcium carbide used in polyvinyl chloride, polyvinyl alcohol, 1,4‑butanediol, chloroprene rubber, and other products, thereby further optimizing the overall industrial structure of Shanxi’s calcium carbide sector.

As a major province rich in coal and electricity resources, Shanxi enjoys uniquely favorable conditions for developing the calcium carbide industry. In an interview with reporters, Li Sanwen, Secretary-General of the Shanxi Calcium Carbide Association, pointed out that during the formulation of the 12th Five-Year Plan, Shanxi proposed to promote acetylene-based chemical industries, while further accelerating the restructuring and spatial realignment of the calcium carbide sector. The province has tightened entry barriers, introduced policies to intensify the phase-out of outdated production capacity, and supported the adoption of advanced energy-saving technologies. Additionally, it has set forth strategic guidelines for reorganizing the calcium carbide industry, aiming to steer the sector toward larger scale, integrated operations, and industrial park‑based development.

 

----Source: China Chemical Industry News

Keywords:

Leave a Message Online

*Please provide your phone number and email address so we can contact you promptly and resolve your issue as soon as possible.

Submit Now